I have a second box set up right next to me, its an Intel 200MHz MMX, with 64mb Ram, yes, its bad, but i want linux on it to try out, learn, etc.

Heres what i've done from the start...

I set the box up, it already had Windows ME on it, on a 4gb HDD, it was my mums old comp.
I got it set up and running, i got it on the LAN through the router, transfered all things my mum wanted onto my comp.

Then, i used the Windows ME Boot disk to get to DOS then i did 'format c:'

I left it to format, once it was done i then had to make a Mandrake boot disk (i think i should have used it from the start, instead of Win ME boot disk )

So i then have to search through ALOT of corrupt floppy disks to find one which worked, then i made the mandrake boot disk with the dosutil on CD1 of mandrake, i put CD1 into cd drive of the comp, then put the new boot disk in the A drive (duh), then rebooted it, the floppy THEN decides its corrupt now so, i search for another floppy some more and decide on using the Win ME Boot disk as i thought "will never use this again so why not" so i format the disk, and try turning it to the mandrake boot disk, and then, its corrupt!

Anyway, i found another one WHICH WORKS, turned it to mandrake boot disk, put it in with cd1 etc, rebooted, and the setup starts, i press enter on the first page and wait for it, it loads, says something about Passing a test, then t says something about "Trying to access Mandrake Linux CDROM disc" so i wait, and then it errors out with loads of numbers on the screen, Im looking at it now and heres the parts which look like they could be the cause.

"kernal BUG at drivers/ide/ide-iops.c:1005!
invalid operand: 0000 [#1]
CPU: 0
EIP: 0060:[<c01af0d3>]      Not tainted VLI
EFLAGS: 00010082"

Then theres loads of numbers and the last couple of lines are

"<0>Kernal panic: Fatal exception in interrupt
In interrupt handler - not syncing"

Now im completely lost, no idea what to try, this is first time trying linux, and its not going good

Anyone with any ideas?

quote:

---

Originally posted by Kao
I have a second box set up right next to me, its an Intel 200MHz MMX, with 64mb Ram, yes, its bad, but i want linux on it to try out, learn, etc.

Heres what i've done from the start...

I set the box up, it already had Windows ME on it, on a 4gb HDD, it was my mums old comp.
I got it set up and running, i got it on the LAN through the router, transfered all things my mum wanted onto my comp.

Then, i used the Windows ME Boot disk to get to DOS then i did 'format c:'

I left it to format, once it was done i then had to make a Mandrake boot disk (i think i should have used it from the start, instead of Win ME boot disk )

So i then have to search through ALOT of corrupt floppy disks to find one which worked, then i made the mandrake boot disk with the dosutil on CD1 of mandrake, i put CD1 into cd drive of the comp, then put the new boot disk in the A drive (duh), then rebooted it, the floppy THEN decides its corrupt now so, i search for another floppy some more and decide on using the Win ME Boot disk as i thought "will never use this again so why not" so i format the disk, and try turning it to the mandrake boot disk, and then, its corrupt!

Anyway, i found another one WHICH WORKS, turned it to mandrake boot disk, put it in with cd1 etc, rebooted, and the setup starts, i press enter on the first page and wait for it, it loads, says something about Passing a test, then t says something about "Trying to access Mandrake Linux CDROM disc" so i wait, and then it errors out with loads of numbers on the screen, Im looking at it now and heres the parts which look like they could be the cause.

"kernal BUG at drivers/ide/ide-iops.c:1005!
invalid operand: 0000 [#1]
CPU: 0
EIP: 0060:[<c01af0d3>]      Not tainted VLI
EFLAGS: 00010082"

Then theres loads of numbers and the last couple of lines are

"<0>Kernal panic: Fatal exception in interrupt
In interrupt handler - not syncing"

Now im completely lost, no idea what to try, this is first time trying linux, and its not going good

Anyone with any ideas?

---

Ok i just opened up the comp, added an extra 64mb ram ()so its 128 now, and i checked the CD Drive, it was set as slave, so i changed it to master, and fiddled with the wires, and tried again, now it gives "no CDROM device found."

So i know its a CD drive error at least, i have a spare cdrom next to me, will be going into the box in a minute

quote:

---

Originally posted by Kao
Ok i just opened up the comp, added an extra 64mb ram ()so its 128 now, and i checked the CD Drive, it was set as slave, so i changed it to master, and fiddled with the wires, and tried again, now it gives "no CDROM device found."

So i know its a CD drive error at least, i have a spare cdrom next to me, will be going into the box in a minute

---

I have never tried Mandrake, but if everything's okay, you should just burn the (3?) CDs and put in CD1. Make sure that in the BIOS it will first check to boot from CD. Then you should get an installer. Your CPU is very slow, so OR mandrake will be very slow, OR you will have to run it in text mode (no graphics).

quote:

---

"kernal BUG at drivers/ide/ide-iops.c:1005!
invalid operand: 0000 [#1]
CPU: 0
EIP: 0060:[<c01af0d3>]      Not tainted VLI
EFLAGS: 00010082"

---

• Make sure you have a CD to install the OS
  
• In your motherboard's BIOS, make sure that it first checks for booting from CD.
  
• You will get an installer when booting
  
• Follow the instructions
  
• Installation is done; system will be booted
  
• you probably still have to configure some things (graphical effects: low or high, etc.)
  
• log in
  
• done