Shoutbox

Hi guys, I had a Fujitsu laptop with shock sensor and well recently i keep getting blue screen of death and i observe i most likely got that if i shift my laptop with some impact.

Might not be accurate but this is what I observe. And I also copied down the error message. Wonder if any expert can share their knowledge here?

IRQL_NOT_LEE_OR_EQUAL
0x00001020
0x0000001c
0x00000000
0x80505780

The IRQL_NOT_LEE_OR_EQUAL error is usually caused by either:

• CPU overheating
  
• Bad RAM
  
• Other hardware errors (video card, sound card etc.)
  
• A device driver error, usually when an incompatible version is run

Given that you're using a laptop, you may be dislodging the RAM/other hardware when shifting your laptop as you have described. The error does not appear to be related to the Fujitsu Shock Sensor utility, but just to be safe, ensure that it is updated to the most recent version for your OS.

A detailed description of your computer (both hardware, OS and software) is very helpful to the rest of the community when diagnosing problems.

Do a memory test with memTest86+. Once it's complete check and see if there is problems. If there is you may need new RAM.

When i had this problem it was bad memory.

Good Luck!