Shoutbox

I have toiled for hours on end to get a Wireless File and Printer sharing network over 802.11g/b for the teo Computers in my household.

Yet, after all that, I have got nowhere. I have tried googling for websites for help and advice but yet nothing. I followed steps but still nothing. So, i thought some of you may be able to help (as I like advice with a real person rather than reading from a site).

Some background info if needed;
• Both computers are running Windows XP Home Edition Service Pack 2
• Both computers have BT Voyager 1040 PCI 802.11b/g Adapters installed
• Connecting to a BT Voyager 2100 ADSL Wireless Router/Modem

I have included a diagram showing some details and images of what I have so far.

If someone could give me steps on how to get the two computers connected or point me to a "Reliable" website that will help me in my problem, it would be greatly appreciated.

Thank you in advance,
hyped

I had a friend recommend to me Network Magic however, I've noticed that it works better on XP Professional.

I went through the same thing until I started using Network Magic which has solved many hassles.

Networking is a pain, and I have exactly the same problem as you, my computers on the network wont communicate with each other. This is a problem for me because I can't access files on different computer hard drives. Before we got a wireless/network printer I couldn't share the printer either. If your printer has an ethernet socket you could plug it into the router. Something to take note of is that the comunication you have drawn that goes between your two computers would mean the were in ad-hoc mode, which they aren't, it is worth remembering that any communication between your computer and your family's goes through your router first.

Networking is always a problem but try this. Open control panel and click on system. then click the tab that says "Computer Name" then click where it says "change" make sure the workgroup on both computers is the same and the computer names are not the same. Then go to printers in control panel on the computer that has the printer installed. Click the tab that says "Sharing" change the sharing name to like "Printer1" and then go to the other computer that does not have it installed.. click add printer. add printer from network and put in the exact url .. lets say your computer name is nemesis and the printer sharing name is printer1 then the url should be \\nemesis\printer1.

Hope this works...

Look, do the thing Triton says, then use network magic (link above), and problems solved
I did it that way..
Surfi pointed me to network magic

I just used Network Magic and it's connected them a snap.
I didn't need to play around, it just connected them for me.

I think the reason the SOHO wizard in XP wasn't working is because Norton Personal Firewall (Installed on my PC) was blocking networking IP address or whatever...

Network Magic opens the wizard and configured it for me.
Thanks TheItalianStallion

quote:

---

Originally posted by hypedupmonkey
Network Magic opens the wizard and configured it for me.
Thanks TheItalianStallion

---

No problem. After all, having been through the same problem with a number of my friends, I instantly knew what needed to be done.

Just so you know my speciality is networks. In particular windows and I do have a good but limited knowledge of Novell as I'm still learning it.

Just a few questions about network magic:

Does it need to remain installed after the file sharing has been set up?
Will it cause any security threats?
Does it just change options in windows that can be changed manually?

quote:

---

Originally posted by tomfletcherman
Just a few questions about network magic:

Does it need to remain installed after the file sharing has been set up?

---

Yes

quote:

---

Will it cause any security threats?

---

No. Network Magic also comes with an intruder detection facility which can be turned either on or off.

quote:

---

Does it just change options in windows that can be changed manually?

---

yes but these settings can be hard to find depending on what operating system you use. Also it allows the router to send files, printing jobs etc. by slightly changing how the data is sent to the router.

Note: I am just a 16 year old computer programmer.. I suck at networking.. i am good fixing hardware and making computer programs. .. yep yep I'm a comuter geek! .. but i do have a social life