Shoutbox

it only runs on 5.1v and i unplug it when i go out so i dont think it will do anything bad (sofar so good )



EDIT here are the instructions.




i have notised that a few of you want to make this yourselfs. so  i have written out the instructions of this thing.

so

what you will need:

- a box

- a old pc fan

- a old usb cable

- scissors

- a little light

- a switch

and LOTS of sellertape(ducktape)



step 1:

                     the door
-----------------------------------------

cut three quaters of a rectangle out of the front of your box. and if you want do it up a little .


step 2:

                        the fan
--------------------------------------------

the fan cant be over 4 volts otherwise the light would not work wile the fan was on. anyway, cut a (ass)hole at the back of the box. if there is a yellow wire on the fan cut it off becos that is useless.insert the fan and secure firmley with tape.

step 3:

                        usb power supply
-----------------------------------------------

so get your usb cable and cut one end off.(the one that isnt attached to the computer)  (male) cut the layer of protective rubber off . cut the white and greencable off if there are some.


step 4:

                    get the power to the fridge
----------------------------------------------------------

connect the red and black cables from the usb and attach the each into there own cable connector ( hte white things with the screws on top).dont connect the fan power leads just yet.


step 5:

                                the light
----------------------------------------------

get a little light maybe led and run two wires of the ones coming out of it already.secure the light / led to the top corner of your box.attach a switch to the light.


step 6:

                          connecting the wires
----------------------------------------------------------------

get the + end of your fan and light and stuff them into the + end of the wire connector( were the + end of the usb cable is) and the same for the - side.


step 7:                        RELAX!!!!!
-------------------------------------------------------------------

now you have a coling cardboard box!

enjoy!   



i  will not take responsebility of this thing. if  you have Q`s please pm me.

i will be happy to reply.




super-schaf



edit edit: here ARE SOME ICS OF THE INSIDE   PIC 1

PIC 2

PIC 3

quote:

---

Originally posted by super-schaf
get a little light maybe led

---

That's a good idea. If I were you I'd put a LED in there. A LED will use heaps less power, and not make as much heat either. If it's not bright enough, you can stick two or three in there.

i agree. i just dont want to trash my box to change it. oh and ehm..... when i ment fan i ment an prosessor fan not a big one...


super-schaf

I'm going to make one and it's going to pawn all of yours

quote:

---

Originally posted by Msg Plus Freak
I'm going to make one and it's going to pawn all of yours

---

Make sure you post some pictures of it

quote:

---

Originally posted by super-schaf
name a usb device

---

vibrator

Atleast i think thats the thing that ddunk posted on the forum about 5-8 months back

I have made the fridge and it pwns all of yours
Just going to paint it before i take a picture of it

what d yu mean by pwns all of yours?

quote:

---

Originally posted by super-schaf
what d yu mean by pwns all of yours?

---

He means, that his fridge is on top of ours

Also check: http://en.wikipedia.org/wiki/Pwn

ok umm what if i am using a 12v cpu fan if i dont have any older ones? cus i want to make that Frigde lol! woot a frigde

????????/
and also can u give a detailed wiring discription plz lol i cant get what u mean lol sry!

Vaiper!