Shoutbox

Is there software that does this? - Printable Version

-Shoutbox (https://shoutbox.menthix.net)
+-- Forum: MsgHelp Archive (/forumdisplay.php?fid=58)
+--- Forum: Skype & Technology (/forumdisplay.php?fid=9)
+---- Forum: Tech Talk (/forumdisplay.php?fid=17)
+----- Thread: Is there software that does this? (/showthread.php?tid=49637)

Is there software that does this? by Nathan on 08-28-2005 at 09:45 AM

Hiya all,
I was wondering if there was software for dial up which does this.
When I pick up the phone and start dialling it switches off the internet on the pc and as soon as I put it down it switches it back on?
I need it for my Auntie to save her hassle.
Thanks


RE: Is there software that does this? by multimillion2k on 08-28-2005 at 10:02 AM

Software? I don't know - most modems are designed to have a higher tolerance to line noise, thus avoiding dropouts. I remember I used to have problems with my first modem disconnecting when someone picked up the phone.
Perhaps you can look for guides that will help you to reduce line noise and do the opposite ot what it says?
As for reconnecting, you could get it to autodial x times. If you set it to wait for a ringtone before dialing it should work. The only thing is if she's on the phone they would hear annoying clicks. I'm sure there's a better solution..


RE: Is there software that does this? by mwe99 on 09-04-2005 at 04:11 PM

I havent heard of one other than to be manual about it.


RE: Is there software that does this? by Anubis on 09-04-2005 at 05:17 PM

One reason why this won't work is that even if your phone line detected the slightest bit of noise it disconnected (i.e. when the phone was picked up) you wouldn't get a dialling tone as the modem cuts out (you would get the dead line tone or silence) so you would have to put the phone down and pick it back up anyway (maybe a few times).
If the line detected a pulse or tone for a dial (which really causes problems with Dial Ups) it would take about 3 seconds to disconnect anyway.

The only way I could think you could do this is to buy some kind of hub that both the modem and the normal phone are plugged into and as soon as the phone is picked up (and then tries to connect to the local exchange for an outgoing dialling tone) the hub cuts off the internet connection and makes sure that the phone connects to the exchange, if then the computer automatically gets the modem to keep connecting with autodial (despite the hub blocking it) as soon as the phone is put down and the hub allows the modem to reconnect - in theory it should kick in almost instantly for a redial.

- However this isn't software, but it is the only way I can think to do it. The best place to ask would be a phone shop or ideally a BT shop that's near you.

You could in theory set some software up to carefully monitor your phone line and take the appropriate action with the modem when needed, but to get it to work you would have to set it up very carefully to process all sounds being received by the modem and it would likely be a farce setting up as it would have to respond to a very specific noise of the phone being picked up and nothing else. In any case the software (even if someone finds something) won't be very reliable.

The obvious sollution is to get a broadband line, but this is likely not an answer you want, but if you shop around you may be able to find one that works out about the same price as the current dial up, it may be slow broadband with a low cap but for most people it will easily do.

But really is it that hard just to click disconect and reconect every time you want to go off and back on the internet for whatever reason, I know as a previous dial up user how it is, but its the most reliable way to get it to turn off and back on when you want it to.