i've been getting bsods saying bad_pool_caller c2 07 cd4

trying to get help for this seems impossible, i recently formatted and reinstalled latest drivers for everything etc

i attach the dump windows created if anyone could help i'd really appreciate it

hmmm, This might help. It has a few links that could work. CTRL + F your way to  bad_pool_caller

i've been on those links before but they didn't really help me, it basically translates as either faulty driver, faulty memory, faulty software, faulty hardware.....


so doesn't actually narrow it down in the end

i've tested my memory with both memtestx86 and MS Memory Tester thingy both went through a good few cycles without any errors showing so i stopped scanning

see this is what the MS site supposedly says my problem is
•    Thepool has already been freed.

•    Parameter 1 = 0x07 : Attempt to free a pool that was already freed
•    Parameter 2 = Reserved (__LINE__)
•    Parameter 3 = Pointer to pool header
•    Parameter 4 = 0

which leads me to think its ram gone bad but each one tests positive.

i have 1.5gb 2 512 sticks that came with my PC and one from my old PC they are different brands but this shouldn't make a difference surely

Go through and test it with one stick out at a time, It sounds like bad memory to me.

Just FYI, RAM can go bad and still "test" fine in memtest and other testers.

which test do you reccommend, there are a few options for each

quote:

---

Originally posted by aNILEator
i have 1.5gb 2 512 sticks that came with my PC and one from my old PC they are different brands but this shouldn't make a difference surely

---

well i think my older PC had better RAM, i beleive i bought a kingston ram stick to replace faulty RAM in that one. my current PC well i couldn't see any brand name on the RAM sticks so i assume its a bit 'worse'

I have to go to hospital now so if you lot come up with some more suggestions i'll do them all when i get back later today

BUMP:

sorry for the double post but i've finally found time to run mem test on all my sticsk seperatly, went through a  minimum of 4 passes each stick

no errors

try using only one at once.... ram may be faulty, tests wrong.

huh... i did use only one at one whilst testing....

and there is no way i'm only using one stick whilst booting into Windows XP

i haven't had the bsod in a few days now so i've only got this connection dropping to sort out ¬_¬

heh, perhaps something was loose.
i use win xp with only 512 mb of ram on my dad's computer and there is no problem ....

yeah but i like my 1.5gb memory to run all my multimedia programs at once

photoshop, illustrator, image ready and flash work lovely all at once