Shoutbox

Thanks for all your help with this guys. I ended up using the jumper idea and it worked fine. No more password
Whoever configured and locked the settings last time set it up so that there could be only 1 hard drive. I have 2 small hd's plugged in now but i can only get it to detect the master one. I have the jumpers on both drives set to 'Cable Select'. I found an area in the bios settings that had all the drives set to none or disabled or something except for one. I figured this was the problem. I then set them all to 'Auto'
This however has not fixed or changed the problem at all..
Any help on this would be very much appreciated.
Thanks guys