login | register | shoutbox

 What happened to the Messenger Plus! forums on msghelp.net?
Shoutbox » MsgHelp Archive » Skype & Technology » Tech Talk » Unplugging IDE cables

Pages: (3): « First « 1 [ 2 ] 3 » Last »
Unplugging IDE cables
Author: Message:
WDZ
Former Admin
*****

Avatar

Posts: 7106
Reputation: 107
– / Male / Flag
Joined: Mar 2002
O.P. RE: Unplugging IDE cables
quote:
Originally posted by Ddunk
If you can get a small pair of pliers around the top and bottom, that could make like easier.
Maybe... I'd have to find a special pair of pliers though, that are small enough to fit in tight spaces, and have jaws that won't damage the connector...
quote:
Originally posted by SonicSam
its either black or grey u see the giant thing at the end of the IDE. u see there is half on one side of the cable and one on the other....
I dunno how you could get a good grip on that... I can't...
quote:
Originally posted by ShawnZ
Another fun thing to try is running across some carpet then brushing your finger across it :refuck:
* WDZ shoots a taser gun at ShawnZ
quote:
Originally posted by MR_5_MR
just pull it out it wont damage it.
:huh: I want to know HOW to pull it out.
08-31-2005 02:11 AM
Profile PM Web Find Quote Report
[MR]
Veteran Member
*****

Avatar
Scruffy Ruffy

Posts: 1060
Reputation: 25
34 / Male / Flag
Joined: Jun 2005
RE: Unplugging IDE cables
quote:
Originally posted by uberdosis
Unless, you realy jerk it and do it all the time.
ya but its not that hard to pull out...not like the power plugs for the HDD...those are really hard to pull out...but the IDE cables are easy to pull out :)

quote:
Originally posted by WDZ
I want to know HOW to pull it out.

by pulling it our of the harddrive...i thought u were sarter than that :( ...just kidding

This post was edited on 08-31-2005 at 02:13 AM by [MR].
[Image: siggy20ss.jpg]
08-31-2005 02:11 AM
Profile E-Mail PM Web Find Quote Report
Plik
Veteran Member
*****

Avatar

Posts: 1489
Reputation: 46
34 / Male / –
Joined: Jun 2004
RE: Unplugging IDE cables
I normally hold either side of the connecter and rock it until it comes lose, it should be easy to get a grip on the left and right side of the connecter.
08-31-2005 02:16 AM
Profile PM Find Quote Report
WDZ
Former Admin
*****

Avatar

Posts: 7106
Reputation: 107
– / Male / Flag
Joined: Mar 2002
O.P. RE: Unplugging IDE cables
quote:
Originally posted by MR_5_MR
not like the power plugs for the HDD...those are really hard to pull out
O_o I completely disagree. The power cables are easy in comparison to the IDE. At least they have those little wing-shaped things sticking out to help you get a grip...

[Image: attachment.php?pid=524824]
quote:
Originally posted by Madman
I normally hold either side of the connecter and rock it until it comes lose, it should be easy to get a grip on the left and right side of the connecter.
It's not easy. :(

.jpg File Attachment: molex_power_conn.jpg (24.39 KB)
This file has been downloaded 244 time(s).

This post was edited on 08-31-2005 at 02:42 AM by WDZ.
08-31-2005 02:41 AM
Profile PM Web Find Quote Report
CookieRevised
Elite Member
*****

Avatar

Posts: 15519
Reputation: 173
– / Male / Flag
Joined: Jul 2003
Status: Away
RE: RE: Unplugging IDE cables
quote:
Originally posted by Madman
I normally hold either side of the connecter and rock it until it comes lose, it should be easy to get a grip on the left and right side of the connecter.
yup, that's the correct way (which Shawnz also said)...

If this doesn't work because you can't get a grip on one of the sides, you may gently(!!!) grab the flat cable itself and gently(!!!) pull it, but it is not recommended to do it many times with the same cable. Best way this is done is by grabbing the cable and holding one of your fingers (or hand) against a solid object, so you don't bump into something else when it suddenly comes loose. But indeed be very carefull.

After it has come of, always pinch the plug a few times to make sure the cable hasn't come off or is loose. Those plugs are only pinched on, and the connections are very very tiny (they are even smaller (twice as small) in the "new" 80-wire IDE cables).

Note: some connectors of IDE's have handles though, but they are very rare as this is a very old type of connector. They aren't much produced and used anymore, cause they cost more to make...

This post was edited on 08-31-2005 at 02:49 AM by CookieRevised.
.-= A 'frrrrrrrituurrr' for Wacky =-.
08-31-2005 02:46 AM
Profile PM Find Quote Report
ShawnZ
Veteran Member
*****

Avatar

Posts: 3146
Reputation: 43
32 / Male / Flag
Joined: Jan 2003
RE: Unplugging IDE cables
quote:
Originally posted by WDZ
O_o I completely disagree. The power cables are easy in comparison to the IDE. At least they have those little wing-shaped things sticking out to help you get a grip...
but they really like to be bitches and jam in there >.<

Spoiler:
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
08-31-2005 02:46 AM
Profile PM Web Find Quote Report
WDZ
Former Admin
*****

Avatar

Posts: 7106
Reputation: 107
– / Male / Flag
Joined: Mar 2002
O.P. RE: Unplugging IDE cables
Thanks for the post, Cookie... I was hoping you'd reply to this. :p Not quite what I wanted to hear though... I wish it was easier to unplug those damn cables... :-/ Oh well.
quote:
Originally posted by ShawnZ
but they really like to be bitches and jam in there
Hmm... if you say so... :p
08-31-2005 04:44 AM
Profile PM Web Find Quote Report
multimillion2k
Full Member
***


Posts: 362
Reputation: 16
– / Male / –
Joined: May 2005
RE: Unplugging IDE cables
You can unplug them????
So that means all my soldering was for nothing..
08-31-2005 04:55 AM
Profile PM Find Quote Report
ShawnZ
Veteran Member
*****

Avatar

Posts: 3146
Reputation: 43
32 / Male / Flag
Joined: Jan 2003
RE: Unplugging IDE cables
quote:
Originally posted by multimillion2k
You can unplug them????
So that means all my soldering was for nothing..

O.o
Spoiler:
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
the game.
08-31-2005 05:02 AM
Profile PM Web Find Quote Report
segosa
Community's Choice
*****


Posts: 1407
Reputation: 92
Joined: Feb 2003
RE: Unplugging IDE cables
You're having trouble with IDE cables?! As mentioned a few times already in this thread it's the POWER cables that are a complete bitch. >.< I spent like 5 minutes getting the one out of my parents' hdd because it just REFUSED to budge and I couldn't get a good grip on it. God damn it was annoying.
The previous sentence is false. The following sentence is true.
08-31-2005 06:19 AM
Profile PM Find Quote Report
Pages: (3): « First « 1 [ 2 ] 3 » Last »
« Next Oldest Return to Top Next Newest »


Threaded Mode | Linear Mode
View a Printable Version
Send this Thread to a Friend
Subscribe | Add to Favorites
Rate This Thread:

Forum Jump:

Forum Rules:
You cannot post new threads
You cannot post replies
You cannot post attachments
You can edit your posts 		HTML is Off
myCode is On
Smilies are On
[img] Code is On