Shoutbox

well this is a big mess.  uhh well the motherboard sorta fits...i had to bend to metal so it would fit but it does...its aligned to only one screw will screw in to the case but thats fine with me.  well first i had the IDE cables plugged in the MoBo and then i turned the computer on and the bios said that there was a configuration error. and the 3.5 floppy drive's light just stays solid it wont turn off.  so then i turned the IDE cables ppluged it backwards...so i started the computer and the bios stopped the configuration error thing .  but when messing with the cables the 3.5 floppy drive's power outlet broke off   i have an extra drive to replace that tho...but in the meantime i just unplugged it.  then i restarted the computer and there was just one error left b/c my moust is usb and not ps/2 so thats nothing to worry about but usually it will say press F1 for options and enter to continue.  but ther was not continue so i press F1 and it seems to be frozen there at that point.  itwill not go to the bios options and all that stuff it is just frozen.  im not sure if i have all the little wires plugged in correct;y (the green red and the yellow and the speaker one).  thanks.

EDIT:  just to let you know that the IDE outlets on the motherboardhave no plastic around them...they are just the prongs sticking out.

EDIT2: i need to know how to plug in the power LED and the speaker plug...also the power sw reset sw and the HDD LED.

thanks.