Shoutbox

quote:

---

Originally posted by ICD
im running linux 10.0

---

Hey Futureboy/girl, this is 2007, we're still using Linux 2.6. Maybe they dropped support for some old cards sometime 2010-2020. Try an older IP stack.

Otherwise, try a complete power cycle. The router at my last place would always crash for some reason. Beyond that... no idea.

yeah sorry I obviously wasn't full awake and reading properly at whatever time this morning.

did you already configure SSID and WEP for your netgear?

the default gateway for netgears is http://192.168.0.1/

This will be kinda technical, but here it goes.

I think you mentioned you have two devices that act as a DHCP server. Your router and your wireless access point. What I suggest doing, is having your router (the one with no wireless) doing the DHCP. What you would need to do is, turn off DHCP on the wireless access point via a web gui. The access point will ask the network "who is the DHCP server" and the router will respond "I am".

I hope this helps. Oh and if it doesn't and something goes wrong, just use the reset button and it should be back to factory default settings.

tried it and i didnt work, if i ping, it just says network unreachable.

and if i turn it off, our other two computers cant talk to the router

this is a bitch to sort out

quote:

---

Originally posted by tony
did you already configure SSID and WEP for your netgear?

the default gateway for netgears is http://192.168.0.1/

---

The netgear router doesn't support WEP/WEP2.
the IP address for the wireless router, is set to 192.168.0.7 and the modem is set to 192.168.1.1

if the router recieves a ping (in theory) it wont regognize it because im on 192.168.1.30
because its on a different subnet, so it forwards it to the modem, which says "here i am"
so then i can go on the internet. but i installed the driver for the adapter, i did everything according to the manual, and it appears to be set up, and it even shows the network its set to,
but the access point is always 00:00:00:00:00, and will not change, when i tell it to set to the correct one.